Agua 55, is the most widely adopted and used membrane in the Agua series of membranes from Theway Membranes.  A sturdy and rugged membrane, Agua 55 is able to handle a wide spectrum of service expectations in different applications. This design and form factor achieves a high degree of commercial success, with it's size, weight & cost/m2 while retaining the advantages of its smaller cousins Agua 20 and Agua 40. The fiber chemistry is designed to be strong, be able to allow higher fluxes and able to take higher pressure and suspended solids shock loads. These modules are suited for process and potable water ultrafiltration. This module is also suited for Effluent treatment. Module is suitable for Crossflow as well as Dead end filtration. Crossflow is recommended for longer and sustainable operation. Consult Theway Membranes for design and suitability. 

Theway Membranes’ reliable and robust membrane retrofits/replacements will help you avoid costly expenditure in replacing these expensive UF membranes.

AGUA 55 Retrofit model of Norit/Pentair X flow Aquaflex 55 with the equivalence level of 7

​

​

   There are multiple levels of exactness to the existing UF membranes you seek to replace

   a) Performance Equivalence (Surface Area equivalence)

   b) Membrane fiber dimension equivalence

   c) Molecular weight cut-off equivalence

   d) Membrane material equivalence

   e) Module dimension equivalence

   f) Module port-size equivalence

   g) Form and Shape equivalence

   h) Operation philosophy equivalence